12 SHlADOWx2
OPERATOR INSTRUCTION MANUAL
QUICKSTART SELF-GUIDED TUTORIAL
The QuickStart is designed to help you use your new SIIADOWX2 metal detector right
away, even if you have never used a detector before. Just follow each easy step carefully
and you'll quickly see how the basic detector functions work. You'll also be introduced to
some important concepts on the way.
Here's what you will need:
• Your fully assembled
SIIADOWX2 metal detector
• Three newer coins: a penny, a nickel, and a quarter
• A nonmetal table or counter surface
Here's what you will do:
1: Perform an Audio Battery Test
2: Adjust the SENSITIVITY control
3: Perform an air test in Discriminate Mode
Prepare for the QuickStart
Place your assembled
SIIADOWx2 on the nonmetal surface. Make sure there are no
metal objects near the coil. Remove any jewelry from your hands and wrists.
Start with these control settings: (see photo on page 18):
•
DISC LEVEL control set to MIN.
•
SENSITIVITY control set to POWER OFF
To Next Page
Loading...