"
9.2.2 Field Distribution
After having hitched the machine to the tractor and having carried
out the necessary regulation, it is
possible to begin to work
• Place the tractor at the
beginning of the field
(position 1). The distance
from the border has to be
half the working width (D/2)
of the machine.
• Move along the field
perimeter keeping the D/2
distance from the border as
long as you arrive in the
position 2. In this position
you have to be at the D
(working width of the
machine) distance from the
position 1.
• Go along till the position 3.
• Make a 90° turn, place the
tractor in position 4 at the D
distance from the position 3
and go along till the position
5.
• Repeat this procedure until you have spread the entire area of the field (positions 6 and 7).
9.2.3 Spreading Variables
The quantity of fertilizer spread depends on the tractor speed, the spreading area, fertilizer type and
humidity, weather conditions and from the adjusting machine.
• Keep the tractor speed constant while working.
• Preserve the fertilizer in a way to keep its features from being altered.
9.3 Parking
The following steps should be done when preparing to store the implement or unhitch it from
the tractor.
• Park the implement on level and fined ground.
• Shut off tractor engine and engage parking brake.
• Unhitch from tractor.
• Remove propeller shaft.
#
! "
To Next Page
Loading...