03-SAFETY
3.1 Recognize Safety Information
This is a safety-alert symbol. When you see this symbol on your
machine or in this manual, Be alert to the potential for personal injury.
Follow recommended and safe operating
practices.
3.2 Understand
Signal
A signal word—DANGER, WARNING, or CAUTION—is used with the safety-
alert symbol. DANGER identifies the most serious hazards.
DANGER or WARNING safety signs are located near specific hazards. General
precautions are listed on
CAUTION safety signs. CAUTION also calls attention to safety messages in this
manual.
3.3 Follow Safety Instructions
Carefully read all safety messages in this manual and safety
signs on your machine. Keep safety signs in good condition.
Replace missing or damaged safety signs. Be sure new
equipment components and repair parts include the current
safety signs. Replacement safety signs are available from your
Shaktiman dealer.
There can be additional safety information contained on parts
and components sourced from suppliers that is not reproduced
in this operator's manual.
Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
Keep your machine in proper working condition.
Unauthorized modifications to the machine may impair the function and/or safety and affect machine life.
If you do not understand any part of this manual and need assistance, contact your Shaktiman dealer.
The manufacturer declines all and every responsibility for failure to comply with the safety and accident preventing
instructions mentioned in this manual book.
To Next Page
Loading...