Need help?Do you have a question about the Shanghai Wafer Microelectronics GA09 and is the answer not in the manual?
General| Brand | Shanghai Wafer Microelectronics |
|---|---|
| Model | GA09 |
| Category | Security System |
| Language | English |
Steps for powering on the device before SMS programming.
Registering admin phone numbers via SMS commands for alerts.
Customizing SMS text for each input port when an alarm is triggered.
Setting predefined SMS text for when all inputs return to normal.
Configuring the timer for periodic status reports via SMS.
Choosing between SMS only, phone call only, or combined alarm reporting modes.
Final step to enable normal operation after programming.
Connecting sensors and defining input port types (NO/NC).
Enabling or disabling specific input ports using SMS commands.
Retrieving historical alarm data logs via SMS commands.
Querying the device's current status and configuration parameters via SMS.
Instructions for installing the companion mobile application.
Procedure for resetting the device to default settings.
Explaining the function and usage of the RST input line.
Troubleshooting common issues with GSM LED flashing patterns.
Diagnosing problems when the MCU LED remains constantly on.
Understanding how the device handles multiple simultaneous alarm triggers.
Information on the character limit for alarm SMS messages.
Methods for temporarily disabling alarm inputs or disarming the system.
Information on how to contact the supplier for service and support.
To Next Page