Charging
Supports QC3.0 fast charge and standard USB charging. When the USB cable is
connected, display shows battery charging icon and power level. The charging indicator
lights up red while charging, it turns off when battery is full.
2.
until it locks inside. Press again to remove the card.
Insert the Micro SD card into the card slot in the indicated direction and press it gently
Micro SD Card Port
1. The port is only for the standard card and supports a capacity up to 2TB.Micro SD
Headphone Output Interface
Device offer industry-standard 3.5mm single-ended and Balanced 4.4mm connectors.
Please use 4.4mm output only with headphones with proper balanced wiring.
USB Driver Playback (USB-C or with matching adapter/cable)
1. It's recommended to use USB drivers formatted to FAT32.
2. Drives up to 2TB are supported.
Bluetooth Input
2. Open Bluetooth settings on your phone and search for new devices.
3. Player will show up as "EC Mini".
4. Pair it with your phone and let it connect.
3. Support up to PCM 384kHz and DSD256.
4. Supported formats: DSD、 DXD、 APE、 FLAC、 WAV、 AIFF/AIF、 DTS、 MP3、 WMA、
AAC、OGG、ALAC、MP2、M4A、AC3、OPUS、TAK、CUE.
1. Go to System settings on the EC Mini and turn on Bluetooth.
To Next Page
Loading...
Need help?
General
