b. Install the USB Driver on the computer
before connecting player.
c. After connecting the player to a
computer, open "Sound " on your
computer, right click on "Shanling
audio device" and click "Set as Default
Communication Device".
How to download the USB driver:
V i s i t t h e Q 1 p r o d u c t p a g e o n
to download the USB
driver.
www.shanling.com
Realtek High Definition Audio
Realtek High Definition Audio
Realtek Digital Output
Shanling Audio Device
Configure(C)
Amplifier
Ready
Ready
Default device
Amplifier
Select the following devices to modify the settings:
Sound
Set default(S)
Attribute(P)
OK Cancel
Apply(A)
Play Record Sound Communication
2. Digital audio signal transmission
a. After booting up the device, enter the System settings, select the
"USB Mode" option and set to the "DAC" status.
" "
c. After disconnecting device from a computer, in the "System" select
"Update Library" and select "Update Now". After update, the TF
card's songs will appear in "My Music".
To Next Page
Loading...
Need help?
General