Shanling Q1 Quick Start Guide

Quick start guide: 1 USB A to Type-C cable: 1
Warranty card: 1 Silicone Case: 1
Attached Accessories
Common Problems
1. It is recommended to use DC5V 2A adapter. Using the adapter with
higher voltage may damage Q1.
2. Unable to start Q1, it may be caused by low power or exhausted
battery, please recharge and then start up again.
3. In the case of system freezing or crashing, please press and hold the
Power button for 10 seconds to force a shutdown.
4. If there is noise from headphones, headphone's output interface may
not be connected correctly, please try to insert it again.
5. When there is no sound, try to use different pair of headphones or
different cable and make sure the system volume is set correctly.

Shanling Q1 Specifications

General

Brand	Shanling
Model	Q1
Category	Watch
Language	English