Need help?Do you have a question about the Shaper Plate and is the answer not in the manual?
General| Brand | Shaper |
|---|---|
| Model | Plate |
| Category | Racks & Stands |
| Language | English |
Official welcome and congratulations on your Shaper Plate purchase, encouraging reading of the guide.
Details on accessing the complete product manual for comprehensive information via a provided link.
Lists and illustrates the items included in the Shaper Plate package, such as the plate and clamps.
Description and illustration of the System 32 Pin component.
Description and illustration of the Support Feet component.
Guides for aligning workpieces on the plate.
A hole on the plate intended for hanging.
A slot designed to accommodate the System 32 pin for positioning.
Designated points on the plate for securing with clamps.
The crosshair marking used for precise alignment within the cut window.
Points within the cut window used for calibration or reference.
Mechanism to release or retract the fence.
A guide or stop used for alignment and positioning.
A textured surface on the bottom to prevent slipping.
A latch mechanism located on the underside to secure the fence.
Component of the clamp that interfaces with the plate.
The part of the clamp designed to avoid marking surfaces.
The depth of the clamp's opening.
The part of the clamp used for tightening and loosening.
Using the fence to ensure the plate is parallel to the workpiece edge.
Using the reticle to align the plate with a specific mark on the workpiece.
Using edge flags and reticle for perpendicular alignment.
Using fence and edge flags for corner alignment.
Information on availability of the guide in multiple languages.
Link to purchase replacement parts for the Shaper Plate.
Contact information for technical support and troubleshooting assistance.
Details regarding patents held by Shaper Tools, Inc.
Legal information including copyright ownership and trademark registrations.
To Next Page