Shark 2020 User Manual

PLOW BLADE ASSEMBLY
Remove blade (1) and both blade gussets (2) from the package. Remove bolts (9) and locknuts (10) from the gussets. To
attach the gusset, first unscrew locknut (4) from the blade. CAUTION: (!) Hold the bolt (5) and washer (6) in place so
that spacer ring (8) does not fall inside the blade. Place gusset (2) on the bolt (5) and screw on the locknut (4). Leave
locknut (4) untightened by 1-2 turns. Place gusset (2) on the base plate (3) and tighten with bolts (9) and locknuts (10).
Leave locknuts (10) untightened by 1-2 threads. Repeat the process to attach the other gusset.
For transport, the Wear Bar (11) is delivered in reversed position. Therefore it’s necessary to flip around the wear bar on
the blade first. Remove bolts (12) and locknuts (13), rotate Wear Bar (11) as shown and reattach it using bolts (12) and
locknuts (13). Tighten locknuts (4), (9), (10), (12) and (13) - see also previous illustration.

Shark 2020 Specifications

General

Brand	Shark
Model	2020
Category	Automobile Accessories
Language	English