10sharkclean.com
3 Choose the appropriate setting.
Thick Carpet & Area Rug Cleaning
Set floor selector to Thick Carpet/Area
Rug.
Carpet & Low Pile Cleaning
Set floor selector to Carpet/Low Pile to
increase the speed of your brushrolls and
to help remove stuck-on dust and debris.
Hard Floor Cleaning
Set floor selector to Hard Floor.
NOTE: For deep cleaning per ASTM F 608 (embedded
dirt in carpets) please set to Carpet/Low Pile.
2 Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
STEP 3STEP 2