4sharkclean.com
SAVE THESE INSTRUCTIONS
DUST CUP/FILTERS/ACCESSORIES
Before turning on the vacuum:
19 Make sure that all filters are thoroughly dry
after routine cleaning.
20 Make sure that dust cup and all filters are in
place after routine maintenance.
21 Make sure accessories are free of
blockages.
22 Use only Shark
®
brand filters and
accessories. Using other brands will void
warranty.
HOSE ATTACHMENTS
23 DO NOT use if airflow is restricted. If the air
paths or the motorized floor nozzle become
blocked, turn the vacuum cleaner off and
unplug from electrical outlet. Remove
all obstructions before you turn on the
unitagain.
24 Keep the end of the hose and accessory
openings away from face and body.
25 Keep cleaning tools and hose suction
openings away from hair, face, fingers,
uncovered feet, or loose clothing.
26 Only use manufacturer’s recommended
attachments.
GENERAL CLEANING
27 DO NOT vacuum up large objects.
28 DO NOT vacuum up hard or sharp objects
such as glass, nails, screws, or coins that
could damage the vacuum cleaner.
29 DO NOT vacuum up drywall dust,
fireplace ash, or embers. DO NOT use
as an attachment to power tools for dust
collection.
30 DO NOT vacuum up smoking or burning
objects such as hot coals, cigarette butts,
or matches.
31 DO NOT vacuum up flammable or
combustible materials (e.g., lighter fluid,
gasoline, or kerosene) or use vacuum in
areas where they may be present.
32 DO NOT vacuum up toxic solutions (e.g.,
chlorine bleach, ammonia, or drain cleaner).
33 DO NOT use in an enclosed space where
vapors are present from paint, paint thinner,
moth-proofing substances, flammable dust,
or other explosive or toxic materials.
34 DO NOT vacuum up any liquids.
35 DO NOT immerse vacuum cleaner in water
or other liquids.
36 Use extra care when cleaning on stairs.
POLARIZED PLUG
To reduce the risk of electric shock, this
vacuum cleaner has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. DO NOT force into outlet
or try to modify to fit.
To Next Page
Loading...
Need help?
General
