Why is my Shark Apex UpLight Lift-Away DuoClean QU603Q not picking up debris?
- Aaaron99Aug 5, 2025
If your Shark Vacuum Cleaner isn't picking up debris and has no or light suction, start by emptying the dust cup and cleaning the filters. Ensure you rinse the filters and let them completely air-dry before putting them back. Also, check the floor nozzle for any blockages and remove any string, carpet fibers, or hair wrapped around the brushroll or Soft Roller. Finally, make sure the brushroll cover is locked in place by turning the nozzle upside down, using a coin to turn the three locks counterclockwise, pushing down on both sides of the cover until it clicks, and then turning the locks clockwise to close.