Why is my Shark EP661C not picking up?
If your Shark Vacuum Cleaner isn't picking up or the suction power is weak, there are a few potential causes: * The dust cup container might be full – empty it. * The dust cup filter may need cleaning or replacing. Remove the filter and check for any obstructions in the air duct, removing them if present. Clean or replace the filter. * The unit may need recharging, so ensure it is adequately charged.
What to do if dust is escaping from my Shark Vacuum Cleaner?
If dust is escaping from your Shark Vacuum Cleaner, consider the following: * The dust cup container may be full, so empty it. * The dust cup filter might not be installed correctly. Review the filter installation instructions. * There might be a puncture or hole in the dust cup filter, in which case you should replace it.
Guide for diagnosing and resolving common vacuum operational issues.
Information on how to purchase replacement dust cup filters.
Guide on how to attach the metal handle to the main unit.
Instructions for connecting the floor brush to the vacuum.
How to manage the power cord for storage and use.
General| Brand | Shark |
|---|---|
| Model | EP661C |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page