Shark Ninja Master Prep Professional - Using the Ninja Master Prep Professional Pitchers

8 1-877-646-5288
Using the Ninja
®
Master Prep
®
Professional Pitchers
WARNING: DO NOT try to place the Blade
Assembly onto the Power Head and then into the
Master Prep Professional pitcher.
1 Place the Master Prep Professional pitcher on a clean,
dry, levelsurface.
2 Holding the blade assembly by the shaft, place it onto
the spindle pin inside the Master Prep Professional
Pitcher.
• Use the Ninja 6-Blade Assembly in the 48 oz. Pitcher.
(fig. 1)
• Use the Ninja 4-Blade Assembly in the 40 oz. Pitcher.
(fig. 2)
IMPORTANT: Place blade assembly inside the
container carefully as blades are sharp.
3 Add the ingredients to be processed into the Ninja
Master Prep Professional pitcher.
4 Place the pitcher splash guard onto the top of the Ninja
Master Prep Professional pitcher. (fig. 3)
IMPORTANT: Never add ingredients into the Ninja
Master Prep Professional pitcher before placing
the blade assembly in first.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing.
CAUTION: Handle the Blade Assemblies with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the Power Head is plugged in for use.
IMPORTANT: Never run the appliance empty.
Fig. 1
Fig. 2
Fig. 3
Shaft
Shaft