Shark NV105 User Manual

17 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

www.sharkclean.com

NV105

Owner’s Guide

Manual del usuario

Table of Contents

Questions and Answers:

S
Shaun MullinsJul 29, 2025
What to do if my Shark NV105 is not picking up dirt?
- J
  jennifer65Jul 29, 2025
  If your Shark Vacuum Cleaner isn't picking up dirt, it may be due to restricted airflow or a lack of suction. Here's what to do: * Check the filters and clean them if necessary, following the instructions for rinsing and drying before re-inserting. * Empty the dust cup, as it might be full. * Inspect the hose and its connections for any blockages, and clear them if found. * If the dust cup is empty and the attachment inlets are clear, check for other potential blockages.
R
Richard NelsonAug 5, 2025
Why does my Shark Vacuum Cleaner turn off by itself?
- W
  wfieldsAug 5, 2025
  If your Shark Vacuum Cleaner turns off on its own, it's likely due to overheating. Here’s how to address this: 1. Turn the power off and unplug the vacuum. 2. Empty the dust cup and clean the filters. 3. Check for blockages in the hose, accessories, and inlet openings. 4. Allow the unit to cool down for at least 45 minutes. 5. Plug the vacuum back in. 6. Turn the power back on to restart the vacuum.
R
ronaldbowenAug 12, 2025
How to fix a Shark NV105 that will not run?
- A
  Andrew JohnsonAug 12, 2025
  If your Shark Vacuum Cleaner won't run, first ensure it's properly plugged in. Then, check the circuit breaker or fuse. Finally, verify that the On/Off button is correctly engaged.
H
Hayley PattersonAug 20, 2025
How to turn on the brush roll on a Shark NV105?
- A
  Anna TurnerAug 20, 2025
  To turn on the brush roll on your Shark Vacuum Cleaner, press the “Brushroll” button to the “ON” position. The brush roll light near the button will illuminate green when it is on. Then, place your foot on the floor brush and pull the handle back to engage the brush roll.

Shark NV105 Specifications

General

Type	Upright
Weight	10.6 lbs
Filtration	HEPA
Cord Length	25 feet
Corded/Cordless	Corded
Bagged/Bagless	Bagless
Model	NV105
Power Source	Electric
Voltage	120V
Included Tools	Crevice Tool

Summary

Important Safety Instructions

General Electrical Safety Precautions

Safety guidelines for electrical operation, including unplugging and cord handling.

General Cleaning Guidelines

Instructions for cleaning the vacuum cleaner, avoiding specific materials.

Hose Attachment Safety

Instructions on using and handling hose attachments to prevent damage or injury.

Getting Started and Assembly

Vacuum Cleaner Assembly Steps

Step-by-step guide for assembling the Shark Navigator vacuum cleaner components.

Carrying the Vacuum

Instructions on how to properly lift and carry the vacuum cleaner by its handle.

Using the Vacuum and Dust Cup Maintenance

Vacuum Operation Modes

How to use the vacuum on different floor types, including carpet and bare floors.

Brushroll Indicator Light Function

Explains the function and meaning of the brushroll indicator light on the power nozzle.

Dust Cup Emptying Procedure

Detailed steps for safely removing and emptying the dust cup assembly.

Cleaning the Dust Cup Screen

Instructions for cleaning the metal screen inside the dust cup for optimal performance.

Vacuum Care and Troubleshooting

Pre-Motor Filter Cleaning

Guide on how to clean the pre-motor foam and felt filters.

Post-Motor Filter Cleaning

Instructions for cleaning the post-motor filter.

Troubleshooting: Vacuum Not Running

Solutions for when the vacuum cleaner fails to power on or run.

Troubleshooting: Poor Suction

Addresses issues of restricted airflow, clogged dust cups, or hoses affecting suction.

Troubleshooting: Brushroll Issues

Steps to take if the brushroll does not spin or engage.

Troubleshooting: Vacuum Overheating

Explains the motor thermostat and how to reset it after overheating.

Checking for Blockages and Maintenance

Dust Cup Air Duct Blockage Check

How to check and clear obstructions in the dust cup air duct.

Hose Intake Opening Blockage Check

Procedure to check and clear blockages in the hose intake opening.

Stretch Hose Blockage Check

Steps to inspect and clear any obstructions within the stretch hose.

Resetting the Motor Thermostat

Steps to follow if the vacuum's motor overheats and shuts off.

Available Additional Accessories

Information on optional cleaning accessories available for purchase.

Product Warranty and Registration

Three-Year Limited Warranty Details

Covers defects in material and workmanship for three years under normal household use.

Warranty Claims and Return Procedure

Instructions for returning the appliance for warranty service, including address and documentation.

Warranty Exclusions and Limitations

Details parts not covered by warranty and limitations on liability for damages.

Registering Your Shark Product

How and why to register a new Shark product for safety notifications.

Related product manuals

Preview: Shark Navigator NV105 Series

Shark Navigator NV105 Series

Preview: Navigator Swivel Pro Complete NV150 Series

Navigator Swivel Pro Complete NV150 Series

Preview: Shark NV22

Preview: Shark NV360

Preview: Shark NV351

Preview: Shark NV601

Preview: Shark NV22L

Preview: Shark NV652

Preview: Shark NV500NZ

Preview: Shark NV350 series

Shark NV350 series

Preview: Shark NV750 Series

Shark NV750 Series