15
BA
C
FD
E
TEXTILE PARTS
TEXTILE PARTS
REMOVAL
WARNING!
If you have any doubt what-
soever regarding the removal or replace-
ment of the interior padding, DO NOT USE YOUR
HELMET. Contact your retailer for assistance or
advise. NEVER use your helmet with any part of
the interior padding removed. The helmet will not
protect you in an accident.
Follow the instructions for the removal, starting
from the end:
1/ Insert the front part in its base, make you sure that
the 3 clips are properly grasped (a) ;
2/ Place the nape shield in its seat, centring it correc-
tly in the helmet (B) ;
2bis / Place the lining on the Velcro parts of the EPS.
3/ Thread each side of the chin strap in the proper
seat in the cheek pads (C) ;
4/ Press the cheek pads until you hear the click of the
snaps, ensure that the bracket of the nape shield is
correctly positioned (D-E-F) ;
5/ Always make sure that there is no crease of
the chin straps under the cheek pads.
WARNING! Damaged interior padding
will compromise the fit of your helmet on
your head and could allow the helmet to come
off your head in an accident, resulting in a head
injury or death.
REPLACE
To Next Page
Loading...
Need help?
General
