To Next Page

To Previous Page

VENTILATIONS

LOWER VENTILATION.

The principal function of this air intake

is to direct a ﬂow of fresh air over the inte-

rior surface of the visor in order to limit the

risk of misting. The fresh air di

fused cuts off contact with the

hot air emitted by breathing

or even by the head inside the helmet.

To open (1) or close (2) the lower ventila-

tion, press the button as indicated.

TEXTILE PARTS - CLEANING

CLEANING THE INTERIOR

The interior textile parts are washable; it is im-

portant to follow the instructions below scru-

pulously to avoid damaging them:

The cheek pads and head section must be

hand washed in warm, soapy water (about

30°). Do not use aggressive detergents but

either a product for delicate materials in

low dilution or household soap. It is essential

to dry textile and foam parts completely before

using them. They must be dried at room tem-

perature. Never iron textile parts. For parts with

a leather appearance or textiles attached to

safety elements, use a slightly damp sponge or

cloth and household soap and rinse with clean

water. Avoid allowing too much water to

come into contact with polystyrene parts.

WARNING! It is essential to ensure that

all interior parts are perfectly dry before

using the helmet.

Shark RIDILL User Manual

Questions and Answers: