14
B
C
A
ED
TEXTILE PARTS
REMOVAL
1/ Ensure that the 2 sides of the chin strap are not
joined by the fastening buckle;
2/ Remove the cheek pads from their support by de-
taching the snaps and release the 2 sides of the chin
strap from these cheek pads (A-B-C) ;
3/ Extract the support of the front lining applying a
pressure towards the rear (D).
4/ Remove the nape shield from its seat, the entire
lining is now detached from the helmet (E).
WARNING!
If you have any doubt what-
soever regarding the removal or replace-
ment of the interior padding, DO NOT USE YOUR
HELMET. Contact your retailer for assistance or
advise. NEVER use your helmet with any part of
the interior padding removed. The helmet will not
protect you in an accident.
To Next Page
Loading...
Need help?
General
