LEGAL INFORMATION: this helmet was specifically
designed for motorcycle use. It is not to be subjected to any tech-
nical modification. In order to offer an adequate level of protec-
tion, this helmet has to be properly adjusted and securely fitted.
Any helmet which has been subjected to a severe impact must
be replaced.
CAUTION: Do not apply any paint, stickers, petrol or any other
solvent to this helmet. Only the visors, which have been appro-
ved N°E11-050439 and marketed under SHARK’s reference
VZ67 can be used with this helmet. This visor is made of injected
polycarbonate.To keep the good optical quality of the visor and
the coatings do not use any solvent, petrol, abrasive paste or si-
milar products for cleaning. We advise to use a soft rag with cool
water and mild soap. Visors printed “DAYTIME USE ONLY” must
not be used at night or in poor visibility conditions.
To Previous Page
Loading...
