9
VISOR
RE PLACE
the helmet (2). Repeat the operation on
the other side.
Fitting the visor:
With the visor in open position, place the
visor buttons in the slides provided on
the plate (3). With your hand flat on the
visor push until it clicks into place (3).
leaving your eyes and face unprotected. In
addition, your head could be pulled to the
side, causing you to lose control of your
motorcycle. These events could cause you to
lose control of your motorcycle, resulting in
an accident, personal injury or death.
WARNING! Tinted or dark visors
should never be used at night or
under poor visibility conditions as they
reduce your ability to see. Never ride with
a fogged visor.
WARNING! If your visor no longer pro-
vides you with clear visibility after
a period of service, you must immedia-
tely replace it. Never ride if your visor is
scratched, dirty, foggy or with your vision
obscured in any way. Always ride with perfect
visibility.
To Next Page
Loading...
Need help?
General
