18
sharkclean.com
ENGLISH
5 The brushroll can be
rinsed under running
water. Let the brushroll
air-dry completely before
replacing in the vacuum.
6 To reassemble, hold the
brushroll by the endcap
and align the other end
with the gear. With the
endcap facing up, place
the brushroll in the floor
nozzle.
7 Close the brushroll garage.
Listen for a click and make
sure the release buttons
are fully closed.
NOTE: The brushroll will only spin
if the brushroll cover is fully closed
and locked.
STEP 5 STEP 6 STEP 7
To Next Page
Loading...
Need help?
General
