1 To adjust the height of the Telescoping Wand, unwrap power cord, press on
the HEIGHT ADJUST button, and pull up to increase height, or push down to
decrease height.
2 Stand the vacuum upright. Step on the Motorized Floor Nozzle and pull the
Telescoping Wand back to start vacuuming.
VACUUMING
STORAGE
1 To store the vacuum, press on the HEIGHT
ADJUST button and press down to
decrease the height of the Telescoping
Wand.
2 Wrap the power cord around the cord
hooks.
STEP 1 STEP 2
OR
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
• Solid Green: The brushroll is on and working as it should.
• Solid Red: There is a jam in the brushroll area. Turn your vacuum off and
remove the blockage.
• *Flashing Red: The Motorized Floor Nozzle is overheating. Turn your vacuum off
and wait for it to cool down.
*See Troubleshooting section for further instructions.
To Next Page
Loading...
Need help?
General
