Shark ROCKET HV300 SERIES Owner's Manual

sharkclean.comsharkclean.com
ASSEMBLY SETTINGS
CLEANING MODES
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE: Select Carpet for stuck-on dust and debris.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
Slide switch to the bottom
to turn o power. To begin
vacuuming, slide switch to
the appropriate setting.
Bare Floor/Small Area Rugs
The brushrolls spin slowly
to clean bare floors and
small arearugs.
Carpet
The brushrolls spin faster
to pick up debris below
the surface ofyour carpets.
OFF SETTING I SETTING II
To clean floors, place foot on floor nozzle
and tilt handheld vacuum back.
UPRIGHT
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills, and other
hard-to-access areas. Stand the vacuum upright,
then step on the foot pedal on the left side of the
floor nozzle and pull the wand up to disconnect it.
ABOVE-FLOOR WITH WAND
Press the Wand Release button to lift the handheld
vacuum o the wand. Great for cleaning stairs and
furniture.
ABOVE-FLOOR HANDHELD
(Click)
(Click)
1 2
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
Ensure all connections click securely into place.

Shark ROCKET HV300 SERIES Specifications

General

Cord Length	25 ft
Dust Cup Capacity	0.42 quarts
Filtration	HEPA
Attachments	Duster Crevice Tool, Pet Multi-Tool
Features	Swivel steering
Type	Corded Stick
Floor Types	Carpet and Hard Floors