13www.sharkninjamanuals.co m
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
CARE OF YOUR CLEANING PADS AND
POCKETS
1 We recommend washing your cleaning pads and
pockets separately from other fabrics to avoid
picking up lint. For optimal cleaning performance,
the pads and pockets may need to be washed up
to (3) three times. Only use liquid detergent (no
powder detergent). Do not use any fabric softeners
or bleach. Line dry. Do not tumble dry. (fig. 23)
2 If there are loose threads on the cleaning pads and
pockets, carefully cut the thread with scissors. Do
not pull on them or cut at the base. (fig. 24)
IMPORTANT: The cleaning pads and pockets may
be very hot from the steam. Use caution when
removing. Let the unit cool for 2-3 minutes.
fig. 24
CLEANING THE NOZZLE
NOTE: To prevent clogging, it is recommended that
you periodically clean the Direct Steam Nozzle and
the extension hose stem.
1 Your Handheld Steamer should not normally require
cleaning, however, should you notice a decrease in
the steam output, it may be necessary to remove
mineral deposits built up around the nozzles.
2 Unplug the cleaner from the electrical outlet.
3 Use a small diameter stiff metal wire, such as a
straightened metal paperclip, and carefully insert the
end of the wire into the nozzle orifice. See illustration
above. (fig. 25999)
4 Move the wire back and forth several times to remove
any deposits.
5 Plug in the appliance to the power outlet and test
steam output.
fig. 25
fig. 23
40°
To Next Page
Loading...
Need help?
General
