Shark S7000 Series User Manual

12 1 800 798-7398
AFTER USE AND STORAGE
1 Press the power button to turn the unit off. Unplug
the cord from the outlet and place the mop into the
upright position. Let the unit cool for 2-3 minutes.
2 When you have finished using the Handheld Steamer,
reattach the handle to the handheld steamer.
3 Remove the cleaning pad from the mop head by
placing one foot on the tab of the all-purpose carpet
pad and lifting the Shark
®
Multi-Function Steam Mop
Lite, avoiding bare skin contact with the hot pad or dirt.
Care of Your Steam Mop
4 Empty the water tank before storage. Remove the
water tank cap and empty the tank over a sink.
Replace the water cap.
5 To store the Shark
®
Multi-Function Steam Mop Lite
hanging up, first remove the head (after it has cooled
and the steam has been released) then hang on a
large hook. (fig. 22)
fig. 22

Shark S7000 Series Specifications

General

Heating Time	30 seconds
Type	Steam Mop
Steam Control	Yes
Power	1200 watts
Accessories	Dirt Grip Pads
Cord Length	25 feet