5www.sharkninjamanuals.co m
Using Your Carpet Glider
THE CARPET GLIDER
1 The Carpet Glider can be used with the Rectangular
Head to lightly steam your carpet and area rugs.
Just place the mop head with cleaning pad attached
into the glider. (fig. 7)
2 Move the Steam Mop back and forth across a
section of the carpet. (fig. 8)
fig. 7
fig. 8
The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.
5 Clean your floors with a forward and backward
motion.
6 Use the reusable, all-purpose cleaning pad to lift up
and lock away all the dirt and debris.
7 When the water tank is empty, the Steam Mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 4. This
applies to switching the mop head or cleaning pad
as well.
NOTE: Please wait 2-3 minutes for the Steam Mop
to cool off before switching the mop head or the
cleaning pad. Never leave the Steam Mop with a
damp/wet cleaning pad on any floor.
8 When you are done, press the power button to turn
the steam mop off.
To Next Page
Loading...
Need help?
General
