05
Close the skimmer opening with cardboard and adhesive tape so that the
Set the liner in place.
+
+
+
Open the carton. Do not use anything sharp to open the carton.
+ Unpack and unfold the liner and spread it out in the sun to warm it up.
Inspect all the seams and surfaces for holes.
+ Remove your shoes to avoid damaging the base or tearing the liner.
+ Spread out the liner, smooth side down. The curved seam should be centred on the
cove at the base of the wall (image 18). The other sea
ms will form straight lines across
the bo
om of the pool.
+ Smooth out all the wrinkles in the bo
om.
IMPORTANT NOTE:
If possible, unfold the liner on the grass one to two hours before installa
on.
Be careful not to leave the liner too long or you may damage the grass.
IMPORTANT NOTE:
The liner is generally smaller than the support structure of the pool. It will stretch
more easily when warm. It is important that the liner is installed on a warm sunny day.
INSTALLING THE LINER
To Next Page
Loading...
