Sharkline S-Pool - Overlap Liner Installation

05
TYPE 1 - overlap
IMPORTANT NOTE:
Some liners may Įt very
ghtly, it is be er to install uprights, top plate and rail
before going onto next step.
IMPORTANT NOTE:
Do not trim oī the excess liner. (if the liner ever needs to be removed, trimming the liner will make
re-installa
on very diĸcult.) Instead, roll up any excess liner and tape it in place near the top of the wall.
up and down, perpendicular tŽƚŚĞŇŽŽr. (remove stabilizers gradually as you fold the liner over
the top of the wall.) This will assure that the liner begins going over the wall straight.
(image 19)
If using vacuum, turn on and push the liner outward with your feet to iron out any wrinkles.
KŶĐĞĮŶŝƐŚĞĚƚƵƌŶŽīvacuum cleaner.
StĂƌƚĮůůŝng the pool with water. As the pool ĮůůƐwork out all the wrinkles and smooth the liner
adjust the liner. Keep smoothing out the wrinkles.
no overlap. (image 20)
the pool wĂůůŽŶŽƚƚƌŝŵŽīƚŚĞexcess liner. (image 21)
INSTALLING THE LINER