06
Install the uprights
9.
The wall joints are hidden behind the upright on most pools. This assures that the skimmer
and the skimmer return holes are not obstructed.
Insert the upright in the bo
om joining plate un l the hooks snaps. (image 25)
IMPORTANT NOTE:
Use the ridges in the pool wall to make sure
the upright column is straight up and down.
IMPORTANT NOTE:
Ensure to leave a gap between the two bo
om rails.
Install the stabilizers
10.
25
26
ASSEMBLING THE POOL FRAME
Insert each end of the stabilizers into the other along the
length of the wall. Make sure every stabilizer Įts on the
pool wall. (image 26)
STEEL STABILIZERS RESIN STABILIZERS
To Next Page
Loading...