Sharkline S-Pool - Install Top Plate; Install Top Ledges

06
Install the top ledges
12.
IMPORTANT NOTE:
Ensure to leave a gap between the two stabilizers.
Install top plate
27
28
ASSEMBLING THE POOL FRAME
PosiƟon and place the top ledges on the top plate. The top ledge must be pushed
toward the inside of the pool. (image 28)
Insert parƟally the four 1" long Phillips drive screws on the top of the top plate. Dis-
tribute evenly the space between the top plate and top ledge.
Align the top plate on the upright and insert it in. The top plate slides into the top of
the upright by applying pressure thus securing the wall and the upright together.
Secure it with the four 1/2"WŚŝůůŝƉƐͲŚĞdžŚĞĂĚĐŽŵďŝŶĂƟŽŶƐĐƌĞǁƐƚǁŽŽŶĞĂĐŚ
side. (image 27).
Apply pressure on the rear part of the top plate while you insert the side screws.
11 .