The RGB FLOW is eqipped with addressable LED strips which visually
connect the front and side panel. Both strips are daisy chained and
can be easily operated using the four-port RGB controller which is
integrated in the case. Fourteen illumination modes can be selected
using the case’s reset switch. Alternatively, the LED strips and three
more RGB components can be controlled via a mainboard with
appropriate software and an RGB header with a 5V-D-coded-G or
5V-D-G pin configuration.
GO WITH THE FLOW
The RGB FLOW has a side panel made of tempered glass, behind which the
installed hardware is displayed. The side panel is without obvious fastening
and is attached only to the back of the case with easily removable thumb
screws. In addition, the hardware is put into perspective, illuminated in a
choice of colors thanks to the LED strip at the bottom of the glass panel.
WINDOW WITH
RGB HIGHLIGHT
To Next Page
Loading...
