If the power supply is not functioning correctly, check the following points:
1. Is the power cord correctly connected to the wall outlet and the socket of the power supply?
2. Make sure the on/off switch is in the "I" position!
3. Check that the 24-pin mainboard connector and the 4+4-pin CPU connector are correctly connected to
the mainboard!
4. Check if the connectors of the cables are firmly plugged into the sockets of the peripherals!
5. Pull the power plug out of the wall outlet and leave the power supply without power for approximately
10 minutes! This will cause a reset of the protective circuits.
If the system still fails to function, please contact support@sharkoon.com.
9. Troubleshooting
To Next Page
Loading...
