2. Safety Standards and Protections
This power supply is designed for a mains voltage of 100 - 240 volts. It complies with CE, FCC and CB safety
standards and has the following protection features:
Over Power Protection (OPP)
If the system demands more power than the specifications allow, the power supply will switch off to protect the
electronics from damage.
Over Voltage Protection (OVP)/
Under Voltage Protection (UVP)
This function shuts off the power supply to protect the components as soon as the internal voltage exceeds or
falls below specified limits.
Short Circuit Protection (SCP)
Should a short circuit occur, the SCP function switches off the power supply and protects the electronics from
damage.
Over Current Protection (OCP)
If the current on a rail exceeds an allowed limit, the OCP function will switch off the power supply, ensuring that
no damage occurs.
Over Temperature Protection (OTP)
If the heat level inside the power supply reaches a critical point, it is turned off by the OTP function to protect
the electronics.
To Next Page
Loading...
