www.sharks-shop.cz Stránka
29
FOLDING AND UNFOLDING STEPS
● FOLDING
Place the truck in a straight position and pull up on
the right red lever with the larger red lever to
successfully fold. After folding, you can pull the
handlebar direction bar to pull. If you need to
insert or transport it in the car, you can open the
quick-release handle of the direction bar and turn
the loose nut to the lowest height.
Note: Before folding the stroller, make sure that
the child restraint system is not unfolded.
● UNFOLDING
Pull down the handle of the smaller red lever to
release the hinged lock and pull down and back to
complete the layout.
● FOLDING DRAG MODE
DIRECTION BAR AND CHILD SEAT ADJUSTMENT
● Handlebar height adjustment
- First open the quick-release handle on the handlebars
and turn the loose nut. Adjust the handlebar direction
bar to a suitable height. After adjusting the height,
tighten the nut and secure the quick-release handle.
- When adjusting, care must be taken not to expose the
safety marking line on the direction bar.
To Next Page
Loading...