www.sharks-shop.cz Stránka
33
ELECTRICAL SCHEMATIC DIAGRAM
MAINTENANCE
- You can wipe the plastic parts of the truck with a damp cloth (clean water or mild detergent only) and
then wipe with a dry cloth. Never use any abrasive cleaners for cleaning.
Note: Do not use alcohol, benzine, kerosene or other corrosive volatile solvents for cleaning. This
could damage the appearance and structure of the truck.
- Do not use a high-pressure water gun for cleaning to prevent water from entering internal electronic
components and cables. This could damage the truck.
- When not in use, store the truck indoors in a dry and cool place, away from unauthorized persons
and pets. Avoid long-term outdoor storage. Sunlight or cold weather can damage the truck (eg:
damage to appearance, tires, batteries, reduced battery life, etc.)
- Never repair or disassemble the truck yourself. It is forbidden to use non-original parts. If the truck is
not complete or damaged, do not use it and contact an authorized service center or dealer. Improper
handling of the product or its components may damage it and void the warranty.
● Battery maintenance
- Do not place the battery in a place where the temperature exceeds + 40 ° C or drops below -20 ° C
(eg: do not place it in a place where it will be exposed to sunlight)
- Do not dispose of the battery in a fire or keep it away from flammable substances. It may damage the
battery, overheat, and even cause a fire or explosion.
- Avoid completely discharging the battery. Recharge the battery regularly when not in use. If you use
the battery in a temperature of around + 20 ° C - the battery achieves the highest performance. When
used in ambient temperatures below 0 ° C, battery performance and life are reduced. When used
down to -20 ° C, the range can be up to half or less than when used at normal temperatures. As soon
as you use it at a temperature of around + 20 ° C, the battery performance will be restored.
To Next Page
Loading...