41
13VT-K100/150
13VT-CK10
Test points layout of Main Unit.
ADJUSTMENT OF EP STILL PIC-
TURE VERTICAL SYNC
Measuring Monitor TV
instrument
Mode EP still picture playback
Input signal Self-recording tape
Test point Monitor screen
Control CH '/" (TR ±/ —) buttons
Specification No Vertical jitter
Figure 2-2.
1. Playback the EP Self-recorded tape in the still mode.
2. Using the CH '/" (TR ±/ —) buttons on the remote
control or inside the front cover, make adjustment so
that the vertical jitter becomes minimum.
3. Then press the STOP button to stop the tape.
Note:
The data of this adjustment is memorized to the E
2
P-
ROM IC.
To Next Page
Loading...
