To Next PageTo Next Page
Need help?Do you have a question about the Sharp 21BM2G and is the answer not in the manual?
Procedures for servicing the high voltage system and picture tube.
Precautions regarding potential X-ray radiation during servicing.
Safety checks to perform before returning the receiver to the user.
Adjustment mode for AGC and geometric settings.
Adjustment mode for white point settings.
Access to miscellaneous adjustment options.
Integrated circuit option adjustments.
Sub-adjustment mode for various parameters.
Adjustment mode for Y-delay settings.
Adjustment mode for offset settings.
Method for controlling service mode functions via remote.
Default factory settings for different models.
Initial alignment of convergence magnets.
Fine-tuning convergence across the screen.
Adjusting the vertical slope of the picture.
Adjusting the vertical position of the picture.
Adjusting the vertical picture amplification.
Adjusting picture pincushion distortion.
Adjusting the horizontal position of the picture.
Adjusting the picture focus.
Sub-adjustment for colour saturation in NTSC.
Sub-adjustment for colour hue in NTSC.
Sub-adjustment for colour saturation in PAL.
Checking the beam protection circuit.
Checking the high voltage protection circuit.
Checking other protective circuits.
Checking video and audio output signals.
Checking video and audio input signals.
Checking the contrast adjustment.
Checking the colour adjustment.
Checking the brightness adjustment.
Checking the tint adjustment.
Checking the sharpness adjustment.
Checking the channel display colour.
Checking the normal mode reset function.
Checking the white temperature adjustment.
Checking colour system settings (PAL/SECAM/NTSC).
Checking sound system settings (B/G, D/K, I).
Checking the noise mute function.
Checking OSD language options available.
Troubleshooting steps for when there is no picture.
Troubleshooting for missing picture and sound.
Troubleshooting for missing sound.
Troubleshooting synchronization issues.
Troubleshooting vertical display problems.
Troubleshooting for lack of vertical scanning.
Troubleshooting for incorrect or missing colours.
Troubleshooting colour sync for PAL/SECAM.
Component diagrams viewed from the top.
Component diagrams viewed from the side.
General safety precautions for servicing.
Crucial safety information for part replacement.
Precautions for servicing areas connected to mains voltage.
General notes on schematic conventions.
Conditions for taking voltage measurements.
Conditions for measuring waveforms.
General information on replacing parts.
Procedure for ordering replacement parts.
List of replacement picture tubes.
List of replacement transistors.
List of replacement diodes.
List of replacement transformers.
List of replacement capacitors.
List of replacement coils.
List of replacement capacitors.
List of replacement resistors.
List of replacement resistors.
List of replacement baluns.
List of replacement switches.
List of miscellaneous replacement parts.
List of replacement resistors.
List of miscellaneous replacement parts.
List of replacement transistors.
List of replacement diodes.
List of replacement capacitors.
List of replacement resistors.
List of miscellaneous replacement parts.
Standard accessories included with the product.
Non-replaceable accessories.
Cabinet parts for the 14BM2S/G model.
Cabinet parts for the 21BM2S/G model.
General
