Sharp 21L-FG1SA - 15. SOUND SYSTEM; 14. ROOM CORRECTION CHECKING

21L-FG1SA/SF/SM/RU
3 – 26
13. SHOCK TEST CHECKING
14. ROOM CORRECTION CHECKING
No. Adjustment point Adjustment procedure/conditions Waveform and others
SOUND
SYSTEM
15
16 OSD
LANGUAGE
QUANTITY
CHECK
1)
Receive "PAL-D/K" signal, press MENU, choose CH-SETTING
then go into SOUND mode to select B/G, I, M. Check the sound
output is not working properly. Select D/K and check the sound
output to make sure it is working properly.
2)
Receive "PAL-I" signal, press MENU, choose CH-SETTING then
go into SOUND mode to select B/G, D/K, M. Check the sound out-
put is not working properly. Select I and check the sound output to
make sure it is working properly.
3)
Receive "PAL-B/G" signal, press MENU, choose CH-SETTING
then go into SOUND mode to select I, D/K, M. Check the sound
output is not working properly. Select B/G and check the sound
output to make sure it is working properly.
1) Check OSD LANGUAGE quantity and type for respect model.
MODEL QUANTITY ENGLISH RUSSIAN CHINESE FRENCH ARABIC MALAY
21L-FG1SF
21L-FG1SA/SM
6
5
O
O
O
-
O
O
O
O
O
O
O
O
21L-FG1RU 2 O O - - - -
No.
Adjustment point
Adjustment procedure/conditions Waveform and others
SHOCK TEST 1) Hit at the top of TV set for two time.
2) Check TV set not damage and TV operation op-
erate correctly.
1
No. Adjustment point Adjustment procedure/conditions Waveform and others
ROM CORRECTION
CHECK
1
1)
Go to SERVICE mode, press "MENU" key until the
SERVICE mode display as in Figure 1 appeared.*
2)
Check the ROM CORRECTION status by monitoring the
screen, follow the model's setting.
CHK1: 1a. During channel changing, set Halfh-Killer
(21h:D6) to "L" during AV mute.
1b. Fix Killer-Level (15h:D0) to "1".
MODEL Micon Version CHK1 CHK2 FIGURE
ALL MODELS RH-IXB725WJN1(Software Ver. 1.25) ACT NO
* OTHERS:
Figure 1
INFO
SLV1 0 0
SLV2 0 0
SLV3 0 0
SLV8 0 0
MICON : N1 CHK1 : ACT
SOFT : 1.25 CHK2 : NO