To Next PageTo Next Page
Need help?Do you have a question about the Sharp 21LT-45SES and is the answer not in the manual?
Warns about hot chassis and electric shock hazards during servicing.
Details safety procedures for servicing high voltage systems and CRT, including static discharge.
Outlines precautions to reduce risks associated with potential X-ray radiation levels during servicing.
Lists checks to be performed before returning the serviced TV to the customer.
Identifies and describes the buttons and functions of the remote control.
Identifies replacement parts crucial for safety and their specific features.
Lists safety precautions to be observed during TV servicing.
Details how to access and use the service menu for adjustments.
Provides detailed descriptions of the various circuits within the chassis.
Covers options and service register settings related to the tuner and other features.
Describes key integrated circuits and their internal block diagrams.
Explains the chroma decoder and luminance processor functions.
Describes the MSP34X0G sound processor for TV audio.
Describes the voltage regulation process in the SMPS using a feedback loop.
Details the SMPS operation during standby mode.
Describes the STV2248 video processor and its role in small signal functions.
Details the SMPS transformer and its role in providing chassis voltages.
Details the over-voltage protection (OVP) functions in the SMPS.
Lists key ICs and their internal block diagrams covered in the manual.
Describes the FM demodulator, including PLL and Automatic Volume Leveling.
Describes the ST92195 microcontroller and its features.
Explains the start-up sequence of the SMPS, including initial power delivery.
Explains the current protection mechanism in the SMPS.
Shows the pin configuration and description for the ST92195 microcontroller.
Details the pin connections for the STV224X video processor IC.
Details the MSP34X0G sound processor for analog and digital TV audio.
Explains how to enter the service mode for alignments.
Explains how to perform IF (Intermediate Frequency) adjustments.
Details the parameters and default values for service adjustments.
Explains how to perform specific geometry adjustments like vertical size and position.
Details how to access and adjust geometry settings via the service menu.
Provides the schematic diagram for the microcontroller and IF circuits.
General
