Sharp 2T-C45AE1X - LCD TV Adjustment Items; MICON Software Data Input; VCOM Adjustment; Software Version Confirmation

2T-C45AE1X
5 – 2
LCD TV ADJUSTMENT ITEM
1. MICON SOFTWARE DATA INPUT
i. Main MICON/Monitor MICON Software Data Input (Main PWB :
QPWBXG912WJZZ )
ITEM CONDITION PROCEDURE
1 Main MICON
Data Input
(Main PWB)
Checker
adjustment
File version
confirmation
1. Data input by Gang Programmer
IC: RH- IXE079WJQZQ 
Input Data: .img file
(filename will be decided by Software Development Dept.)
2. At checker, confirm the version and perform operation
inspection.
2. VCOM ADJUSTMENT
i. Enter service mode key and go to VCOM/TEST PATTERN Page
ii. Press“Enter”key(atVCOM) .
iii. Adjusttheflickereffectbypressing“VOL+/-“ofRCkey .
iv. Press“Enter”keyaftergetthebestvalue
3. SOFTWARE VERSION
Confirmation on Software version will be done during meeting.
Model Software Package
2T-C45AE1X Erica3_Asia_Pack04_vX.XX_boot.img
Main Software Filename : X.XX is Software version.
If any changes of software, will be informed by MARUHE.