Sharp 32FA2E User Manual

8
ū Audio Receiver - Sends audio signal from terrestrial/satellite
broadcast via HDMI to the AV receiver without using any
additional audio cables, this functions is available only on
HDMI 1* or 2* output (*- optional base on model).
ū Device Auto Power O - Automatically turn o connected
devices via HDMI CEC, when you turn o TV.
ū TV Auto Power On - when you turn on any of connected
HDMI CEC devices, TV will start up automatically.
ū Device List - show list of connected CEC devices
ū Device Menu - Allows you to access devices menu
and operate the menu using TV remote control.
Version Info - shows version of TV software
Store Mode** - switch ON/OFF shop demonstration mode
* - HDMI CEC must be supported by connected device.
** - available only if store mode was selected during rst time installa-
tion
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2. Navigate through the menu using ▲/▼/◄/►.
You can now:
Set areminder by pressing GREEN.
View aprevious day by pressing YELLOW.
View the next day by pressing BLUE.
[INFO] shows detailed information about the selected post
3. Press [EXIT] to exit the 7 day TV Guide.
USB mode / Media player
USB mode oers playback of various dierent types of content that you
have saved on your USB Memory Stick. On switching to USB source the
USB mode menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on le type.
1. You can navigate through the menus using the scroll
▲/▼/◄/►buttons. To conrm the item you wish to play/view press
[ENTER] button.
2. Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3. You can now access the item. Press ENTER to view.
4. While viewing you may control the item playback modes by using the
remote control buttons or by invoking playback navigation menu and
selecting on-screen buttons ▲/▼/◄/► and [ENTER]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.

Sharp 32FA2E Specifications

General

AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (max)	60 W
Power consumption (standby)	0.5 W
Power consumption (typical)	26 W
Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Display technology	LED
Native aspect ratio	16:9
Display diagonal (metric)	80 cm
Motion interpolation technology	AMR (Active Motion Rate) 100
Audio formats supported	AAC, AC3, EAC3, LPCM, M4A, MP3
Image formats supported	BMP, JPEG, JPG, PNG
Video formats supported	AVI, DAT, H.264, H.265, HEVC, MKV, MOV, MP4, MPEG4, MPG, TS, VOB
Audio decoders	Dolby Digital, Dolby Digital Plus
RMS rated power	16 W
Number of speakers	2
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	IR
Tuner type	Analog & digital
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Product color	Black
Rollable display	No
Panel mounting interface	100 x 100 mm
Package weight	4600 g
Sustainability certificates	CE, REACH, RoHS

Weight and Dimensions

Depth (with stand)	180 mm
Width (with stand)	732 mm
Height (with stand)	483.1 mm
Depth (without stand)	74.8 mm
Height (without stand)	434 mm