Sharp 32R-S50

22
→
MP AA
TV GUIDELINES
AD : OFFDO
W NLO
STATUS :ON
– – –
–
NIPUT SECRET No.
2 3 4
1
NIPUT SECRET No.
L ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to
“STATUS”, then press
VOL (+) or (–) to activate ON the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
3 Press MENU , then “INPUT SECRET No.” will be displayed.
4 Enter the 4-digit SECRET No. using the REMOTE KEYPAD .
5 Press MENU and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data as same as you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press MENU , then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD , then
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
Note:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
Parent Control (V-CHIP Operation Continued)
AC I VATEDT
V – CH HIP AS BEEN
23
TV– Y7
FV
– – –
–
NIPUT SECRET No.
∗ ∗ ∗
∗
NIPUT SECRET No.
20-23 32/36R-S50.p65e 19/1/01, 5:15 PM22