Sharp 32R-S50

23
– – –
–
NIPUT SECRET No.
∗ ∗ ∗
∗
NIPUT SECRET No.
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
L If you intend to change or forget your Secret No., clear the original Secret No. and set
up a new one.
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To
cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has
been activated], then “INPUT SECRET No.” will be displayed.
2 Press and hold both VOL (+) and CH DOWN ( 9 ) on the TV set
simultaneously until the message “INPUT SECRET No.”
disappears.
3 Press MENU two times to exit.
Parent Control (V-CHIP Operation Continued)
(On the Set)
VOL (+)/CHANNEL
DOWN (
99
99
9 ) buttons
CH
VOL +
MENU
20-23 32/36R-S50.p65e 19/1/01, 5:15 PM23