Sharp 4T-B70CJ1U - CHAPTER 3. ADJUSTMENT PROCEDURE; [1] ADJUSTMENT PROCEDURE

17
CHAPTER 3. ADJUSTMENT PROCEDURE
[1] ADJUSTMENT PROCEDURE
1. HOW TO START ADJUSTMENT PROCESS MODE
1) WhileholdingdowntheINPUTandVolumeDOWNkeysatthesametime,plugintheACcordtoturnonthepower. (“K”
standing for inspection process mode is displayed on the upper left position of thescreen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode
screenappears.)
2. HOW TO EXIT ADJUSTMENT PROCESS MODE
1) To exit it, turn off the power using the Power switch or remote control.
3. REMOTE CONTROLLER KEY OPERATION OF DISPLAY IN ADJUSTMENT PROCESS MODE
1) Keyoperation
Remote
controller key
Main
unit
key
Function
CH (
/
)
CH (
/
)
(Remote controller key)
Moving an item (line) by one (UP/DOWN)
(Main unit key)
Moving a page by one (UP/DOWN)
VOL (+/-)
VOL (+/-)
Changing a selected item setting.
(Remote controller ley) +1/-1
(Main unit key) +10/-10
Cursor (
)
-
Turning a page (PREVIOUS/NEXT)
Cursor (
)
-
Changing a selected line setting (+10/-10)
INPUT button on remote controller
INPUT button
Input source switching (toggle switching)
TV -> INPUT1(HDMI1) -> INPUT2(HDMI2) -> INPUT3(VIDEO)
ENTER
-
Execute a function.
2) Description ofdisplay
Current selected input
Current page / Total pages
Current color system
LCD panel size / Destination
1/7 [INFO]