Sharp 50BJ3K - User Manual

To Next Page

Quick Start Set Up Guide

For information on using the TV’s features, please refer to the Operating Instructions. (Available online to download.)

Quick & easy guide for setting up your TV

What is included in the box

Using the remote control

Setting up the TV for the  rst time - including attaching the stand

Connecting other devices to the Television

Need help setting up or using your TV?

Please contact the UK & ROI Helpline*

Telephone UK 0330 024 0803 or ROI 01443 3323

Online support at: www.umc-uk.co.uk

Email support at: service@umc-uk.co.uk

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your

phone provider.

Calls to the ROI number are charged at the local call rate.

The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.

Bank Holidays - 10am to 4pm

Closed Christmas and New Years day

Model Numbers

50BJ2K

50BJ3K

50BJ4K

50BJ5K

Trademark

Sharp

Model ID 50BJ2K

50BJ3K

50BJ4K

50BJ5K

Energy e ciency class A+

Visible screen size (diagonal) 127 cm / 50 inches

On-mode power consumption 70.0 W

Annual energy consumption *1 102 kWh

Standby power consumption *2 <0.50 W

O mode power consumption

n/a

Screen resolution 3840 (H) x 2160 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television

operating 4 hours per day for 365 days. The actual energy consumption will depend on how the

television is used.

*2: When the TV is turned o with the remote control/standby button and no function is active.

Product  che

50BJ2K

50BJ3K

50BJ4K

50BJ5K

RF 75 ohm Antenna / Analog / DVB / Satellite

Inputs 3 x HDMI, 3 x USB, 1 x SD card reader,

1 x RJ45 LAN/Ethernet,

1 x Composite/CVBS Video & Component/YPbPr Input, 1 x L/R Audio input for

Composite/CVBS & Component YPbPr

Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone

Speaker*/ Ampli er Watts (RMS) 2 x 10 / 2 x 8

Voltage and power consumption

AC 220V ~ 240V; 50Hz

70/95/115W (home mode/standard/max)

(<0.5W in Standby)

Dimensions including stand (mm)

1124W x 698H x 254D

Net weight (Kgs) 12.2

Wall Mounting VESA 200 x 200 (mm)

SHA/QSW/0089

Win a

Soundbar

www.registertoday.co.uk/sharp and enter into a prize draw to

Terms and conditions apply. Online registration only.

and

enter

into

prize

draw

**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

Harman Kardon is trademark of HARMAN International

Industries, Incorporated, registered in the United States

and/or other countries.

The terms HDMI, HDMI High-De nition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks

of HDMI Licensing Administrator, Inc.

Technical Speci cation

Sky Remote Code

If you wish to use your Sky remote to operate the TV’s basic

functions, you will need a Sky remote control (Revision 9 or later) and

you will need to program it with the code 2134. If you wish to use

your Sky Q remote to operate the TV’s basic functions, you will need

to program it with the code 4170.

Microsoft PlayReady™

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution

of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property,

including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content

and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage,

content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.

Revocation should not a ect unprotected content or content protected by other content access technologies.

Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you

will not be able to access content that requires the upgrade.

Using the remote control

GUIDE

VOL

SOURCE

SOUND

PICTURE

ON/OFF

TEXT

SUBTITLE

INFO

BACK

FAV

APPS

GOTO

A-B

ANGLE

PEAT

IST

PVR/MEDIA

EXIT

Freeview Play

STANDBY - Switch on the TV when in standby or vice versa.

FREEVIEW PLAY - Access the Freeview Play app.

NUMBER BUTTONS - 0–9 to select a TV channel directly.

MUTE - Mute the sound or vice versa.

TV GUIDE - Opens the 7 day TV guide (digital TV mode).

VOL (+/-) - To increase/decrease the sound level.

PICTURE - Scrolls through picture mode options.

SOUND- Scrolls through sound mode options.

SOURCE - To display the input/source menu.

CH (+/-) - To increase or decrease the channel being watched.

MENU - To display OSD menu.

EXIT - To exit all menus.

( / / / / OK) - Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

BACK - To go back a previous step.

FAV - To display favourites menu.

INFO - Press once for now/next channel information.

- Press twice for information about the current programme.

TEXT - To enter/exit Text.

SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).

TV - To switch to Digital Channels.

YOUTUBE - Access the Youtube App.

NETFLIX - Access the Netﬂ ix App.

APPS - Access the APPS menu.

RECORD - Access the USB record function.

REC LIST - Opens the list of previously recorded items.

GOTO - To go to a speciﬁ c chapter.

A-B - Press once to set point, press a second time to return to point.

ANGLE - Select different angle of DVD.

REPEAT - To repeat playback.

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc

(To EJECT the disc press/hold the button for 4 seconds)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

Key

For models with integrated DVD players.

For models with PVR Function.

For models with USB Playback.

For models with 3D functions.

Freeview Play brings together live TV viewing with ‘‘catch up’’

TV services such as BBC iPlayer, ITV player, More4 and Demand

5. The Freeview Play Explore app features a carousel of genres

to select from when searching for programmes, such as sport,

comedy, dramas and soaps, etc. Content is made up from

recommendations of the major broadcasters and offers an

alternative means of searching.

Note that to use the full functionality of Freeview Play your set

must be connected to the internet.

To receive Freeview channels, in particular Freeview HD

channels, you will need a Digital TV aerial and be in a

good Freeview coverage area.

You can check coverage for your postcode

at www.freeview.co.uk.

Please note that any Freeview HD channels found during

tuning will be placed in channel positions above 100. For

example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Accessories

Included with this TV are the following accessories

What is included in the box

Please save your box/packaging as you will need this in the event of warranty/service repair or support.

We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to

package your item in the event of warranty/service repair is in it’s original box/packaging.

1 x Quick Start Guide

1 x TV

1 x Remote Control and 2 x AAA Batteries

1 x Stand installation pack

Additional Accessories

Should you wish to connect older/analogue devices to your television, you can purchase the necessary

cables either from your retailer or at www.umc-uk.co.uk/cables

RF Cable

1 x Safety Leaﬂ et 1 x Wall bracket spacer kit

SHA-QSW-0089 50BJ5K.indd 1SHA-QSW-0089 50BJ5K.indd 1 24/05/2019 09:07:0224/05/2019 09:07:02

Other manuals for Sharp 50BJ3K

Quick Start Setup Guide2 pages

Need help?

Do you have a question about the Sharp 50BJ3K and is the answer not in the manual?

This document describes a Sharp television, focusing on its setup, connectivity, and features.

Initial Setup and Stand Installation

The television requires initial assembly, specifically the attachment of its stand. To do this, the TV panel should be placed face down on a flat, clean surface to prevent damage. The stand feet are designed to be longer at the front of the TV and shorter at the back. Four screws are provided to secure the stand feet to the underside of the TV. A cross-head screwdriver is required for this step.

Connecting to Power and Aerial

Once the stand is attached, the TV can be connected to a power socket. For users wishing to access Freeview/Saorview channels, an outdoor digital TV aerial must be connected to the RF input on the TV. If these channels are not desired, this step can be skipped.

Powering On the TV

The television can be powered on using the TV control stick located on the TV set. Alternatively, the supplied remote control can be used. Before using the remote, batteries must be inserted. The standby button on the remote will power on the TV.

Wall Mounting

For wall mounting, the four screws supplied in the wall mounting holes on the rear of the TV must first be removed. The wall mount can then be attached to these holes. The wall mounting bracket should be installed according to the manufacturer's instructions. Spacers, if shown in illustrations, are not applicable to all installations.

First-Time Installation Wizard

Upon first power-on, the TV enters a First Time Installation mode. This mode can also be restarted by restoring the set to default settings via the 'About TV' Menu.

Introduction: This screen welcomes the user and prompts them to begin setup.
Language Selection: Users can select their preferred on-screen display language. This choice affects the language of menus and associated information. This setting can be changed later via Settings > System Menu > Language.
Country Selection: The correct country flag must be selected to ensure the TV installs functions applicable to that region.
Environment of Use: Users choose between 'Home Mode' and other options. 'Home Mode' is a power-saving mode that reduces energy consumption by up to 25% by lowering power to the LED/LCD panel. This setting can be adjusted in the picture mode settings. In 'Home Mode', the TV will automatically switch off after 4 hours if no buttons are pressed on the TV or remote. This auto-standby feature can be modified via Settings > Time > Auto Standby.
Network Setup: The TV can be connected to a broadband router or wireless network to enable Smart functions. Connecting via an Ethernet cable is recommended and will skip this step.
Set Up Netflix: If a Netflix account is available, it can be set up during this stage. After validation, the installation process continues.
Default Source Selection: Users select their most frequently used source. If 'Digital TV (Freeview)' is chosen, the TV will automatically tune in and default to Freeview. If another source is selected, the TV will not tune in at this stage but will default to that input. Tuning can be performed later via Settings > Channels.
Tune in Channels: Users are prompted to install terrestrial channels. An outdoor aerial must be connected to the "RF IN" socket. Selecting "Next" initiates the automatic tuning process.
Support Advice: Information regarding support is displayed briefly. Tuning continues, and a progress bar shows the number of channels found. If signals from multiple transmitters are detected, users will be asked to select primary and secondary regions.

Connectivity Ports

The television offers a range of connectivity options:

Ethernet/LAN (A): For network connection, essential for Freeview HD services and smart functions.
Digital Audio (B): Digital Optical Audio Output.
USB 1 (C) & USB 2 (D): USB 2.0 ports.
Audio shared for Video/Composite and Component/YPbPr (E): L/R audio input.
HDMI 1 (F) & HDMI 2 (G): HDMI inputs.
Video Input (green) and HD input (YPbPr) (H): Video/YPbPr input.
SAT IN (I): Satellite input.
RF in (J): RF/TV aerial input.
HDMI 3 (K): HDMI input (ARC).
USB 3 (L): USB 2.0 port.
CI card in (M): Common interface module.
SD (N): SD card input.
Earphones (O): Earphone input.
Service Input (P): Input used only by service centers.

Remote Control Functions

The remote control provides comprehensive control over the TV:

STANDBY: Switches the TV on/off from standby.
FREEVIEW PLAY: Accesses the Freeview Play app.
NUMBER BUTTONS (0-9): Selects TV channels directly.
MUTE: Mutes/unmutes sound.
TV GUIDE: Opens the 7-day TV guide (digital TV mode).
VOL (+/-): Adjusts sound level.
PICTURE: Scrolls through picture mode options.
SOUND: Scrolls through sound mode options.
SOURCE: Displays the input/source menu.
CH (+/-): Changes channels.
MENU: Displays the OSD menu.
EXIT: Exits all menus.
(A/7/4//OK): Navigates on-screen menus and adjusts settings.
BACK: Returns to the previous step.
FAV: Displays favorites menu.
INFO: Displays now/next channel information (press once) or current program information (press twice).
TEXT: Enters/exits Text mode.
SUBTITLE: Toggles subtitles on/off.
TV: Switches to Digital Channels.
YOUTUBE: Accesses the YouTube app.
NETFLIX: Accesses the Netflix app.
APPS: Accesses the APPS menu.
►RECORD: Accesses USB record function.
►REC LIST: Opens list of recorded items.
DO: Restarts current chapter.
►►: Advances to next chapter.
■: Stops playback/Ejects disc (press/hold for 4 seconds to eject).
◄◄: Fast rewind.
►►: Fast forward.
►/II: Play/pause.
GOTO: Goes to a specific chapter.
►A-B: Sets point (press once), returns to point (press second time).
▲ ANGLE: Selects different DVD angle.
►REPEAT: Repeats playback.

Sky Remote Code

For basic TV functions, a Sky remote control (Revision 9 or later) can be programmed with code 2134. For Sky Q remotes, use code 4170.

Included Accessories

The TV comes with a remote control, two AAA batteries, a Quick Start Guide, a Safety Leaflet, a stand installation pack, and a wall bracket spacer kit. Additional cables for older/analogue devices can be purchased separately.

Freeview Play

Freeview Play integrates live TV with catch-up services like BBC iPlayer, ITV Player, More4, and Demand 5. The Freeview Play Explore app offers a carousel of genres for searching programs, including sport, comedy, dramas, and soaps, with content recommendations from major broadcasters. Full functionality requires an internet connection. To receive Freeview HD channels, a digital TV aerial and good Freeview coverage are necessary. Freeview HD channels are placed in positions above 100 (e.g., BBC1 HD on 101).

Microsoft PlayReady™

The product incorporates Microsoft PlayReady™ technology to protect intellectual property, including copyrighted content. This device uses PlayReady technology to access protected content. If the device fails to enforce content usage restrictions, content owners may require Microsoft to revoke its ability to consume PlayReady-protected content. Revocation does not affect unprotected content or content protected by other technologies. Users may be required to upgrade PlayReady to access content. Declining an upgrade will prevent access to content requiring it.

Maintenance

It is crucial to save the original box and packaging. In the event of a warranty/service repair or support, the TV must be packaged correctly, and the original box/packaging is the safest way to do this. Warranty/service cannot be performed if the item cannot be packaged correctly.