13
Manual Channel Preset (PRESET USING FREQUENCY TUNING)
1. Depending on the programme channel you want to preset, press
the 6 button to select single / double digit entry.
2. Select the programme channel number you want to preset with
the 0 ~ 9 digit buttons.
3. Press the MENU button to see the MAIN Menu.
MAIN Menu
4. Press the BLUE button to see the TUNE Menu.
TUNE Menu
5. Press the Cursor LEFT/RIGHT buttons / to select (with
white letters) the Channel type: CH (Aerial) or CC (Cable).
6. Press the Cursor DOWN button to select SEARCH.
SEARCH
7. Press the Cursor LEFT/RIGHT buttons / to start preset.
The tuning sequence will stop when a signal is detected, if the signal
is not the required channel press or to continue.
8. Press the GREEN button to memorize.
9. Press the TV button to clear the on-screen display.
Repeat the above procedure for presetting other programme chan-
nels.
To Next Page
Loading...
