This option allows you to set a code, which will be displayed at TV switch on time. There is a password to change the
code.
1. Press the MENU button to see the MAIN Menu.
2. Press the YELLOW button to see the FEATURES Menu.
3. Press the Cursor UP button to see the POSTCODE Menu.
4. ENTER PSW (Password): enter the 4-digit using the number buttons 0
to 9.
It is indispensable to enter the password in order to continue
configuring the postcode.
5. When the password has been set:
Press the RED button to change the password or
Press the GREEN button to memorize the password and to
have access to the next item.
6. ENTER CODE (Postcode): Press the Cursor UP/DOWN buttons
/ to set or change the first letter/number. Letters A to Z
of the alphabet, a blank space and the numbers 0 to 9 will appear
sequentially.
7. Press the Cursor LEFT / RIGHT buttons / for changing the
position of the cursor and the / buttons for changing the
letters (repeat this action for other letters/numbers).
8. When you have finished the eighth letter, Press the BLUE button
to confirm the postcode.
9. When the postcode has been set:
Press the GREEN button to activate the postcode or
Press the RED button if you wish to cancel all the data.
About Postcode: If you enter and memorise your postcode, in the
event of loss or the set being stolen and later recovered, the postcode
can be used to identify your TV.
Notes: As a precautionary measure, make a note of your "Password"
and the "Postcode", and keep it in a familiar place.
IF YOU LOSE OR FORGET YOUR «PASSWORD», CONTACT YOUR
TECHNICAL SERVICE OR DEALER.
22
Postcode
VCR Mode
Channel selectors (V CH /\)
These buttons are used for changing channels and set-
ting the timer.
Play button B
Press this button to start playback.
Record button M
Press to start recording. If the video cassette is protected
against recording, it will be ejected.
Stop button L
Press this button to stop playback or recording.
Operate button Bl VCR
Press this button to turn your VCR on.
Fast forward/picture search forward
FF
and
Rewind/picture search reverse
GG
buttons
Both these buttons have the following function:
To move through the cassette faster, press to STOP
button and then press the
FF
or
GG
button to fast for-
ward or rewind the cassette.
Press the STOP button to stop fast forward or rewind.
Picture Search
During playback, press the
FF
button for forward
GG
picture search, or the button for reverse search.
Press the PLAY button to resume normal playback.
SHARP VCR can be operated using the TV remote control.
For further details, please refer to operation manual of your VCR.
POST CODE Menu
ENTER PSW (Password)
ENTER PSW
----
POSTCODE
Password set
ENTER CODE (Postcode)
ENTER PSW
****
RED BUTTON: CHANGE PASSWORD
GREEN BUTTON: CONTINUE
POSTCODE
➜
Postcode set
ENTER CODE
************
DEACTIVATE: RED BUTTON.
ACTIVATE : GREEN BUTTON
POSTCODE
ENTER CODE
*
-------
POSTCODE
Press BLUE button to confirm
To Next Page
Loading...
