Sharp LC-60UI9362K

Other manuals for Sharp LC-60UI9362K

Questions and Answers:

J
Julie HowardAug 17, 2025
Why is my Sharp TV not saving channels after re-tuning?
- S
  Shannon FrancisAug 17, 2025
  If your TV isn't storing channels after re-tuning, it's likely that the channel database has become corrupt. To fix this: 1. Turn off the TV. 2. Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again. 3. Using the remote control, press [MENU] followed by 8-8-8-8 to enter the initial setup/first time installation menu. 4. Press OK to let the TV run the full tuning process. 5. Once completed, turn off the TV, reconnect the RF/Aerial cable, and turn the TV back on again. 6. Repeat steps 3 & 4.
J
Jennifer SanchezAug 19, 2025
Why is my Sharp TV not receiving all digital channels?
- A
  Anna FloresAug 20, 2025
  If you are not receiving channels after tuning your Sharp TV, first check that you are in an area that can receive Freeview/Saorview by visiting www.freeview.co.uk or www.saorview.ie. Then, ensure you are using an aerial that can receive a good digital signal. In most cases, an outdoor digital hi-gain/wideband aerial is needed. In areas with excellent digital coverage, a loft type aerial may work, but a booster between the TV and the aerial wall socket is highly recommended. Portable/indoor aerials are not suitable for receiving a good digital signal.
Q
qsnyderAug 22, 2025
How to connect external speakers to Sharp LC-60UI9362K for louder sound?
- G
  garciawilliamAug 22, 2025
  To get louder sound, you can either use the 3.5mm headphone output on the TV with a 3.5mm to phono cable to connect to an amplifier/surround sound/soundbar (note that this will deactivate the TV’s built-in speakers), or connect a digital optical audio cable from the TV’s digital optical audio output to your amplifier/surround sound/soundbar digital optical audio input.
M
Michael BoydAug 25, 2025
What to do if I forgot my Sharp TV password?
- J
  jonathanwilliamsAug 26, 2025
  If you've forgotten your TV password, use the master password '4711' to access the TV menu and reset the normal password.
A
alanvillanuevaAug 27, 2025
How to get sound when connecting Playstation/Xbox to Sharp LC-60UI9362K via component cables?
- J
  james42Aug 28, 2025
  If your Playstation/Xbox is connected via Component cables (red, green & blue) and you're not getting any sound, it's because component cables only transmit HD pictures. To get sound, connect the red & white audio cables on the Playstation/Xbox to the red & white Phono inputs (or mini AV input where fitted) on the rear of the TV. Please refer to the ‘Connections’ pages.
C
Christopher SmithAug 30, 2025
What to do if no picture or sound when connecting Playstation/Xbox to Sharp TV via HDMI?
- K
  Kathryn ClarkAug 31, 2025
  If your Playstation/Xbox is connected to the TV via HDMI but you aren't getting any picture or sound, ensure that the TV's source is set to HDMI and that your Playstation/Xbox settings are configured as per the Playstation/Xbox instruction manual.
B
Brian ElliottSep 2, 2025
How to turn off auto standby on Sharp TV?
- K
  Katelyn BaileySep 2, 2025
  To stop your Sharp TV from automatically turning off after 4 hours, go to the ‘Time’ menu settings, scroll down to Auto Standby, and select OFF.
K
Kevin YorkSep 5, 2025
Why is my Sharp TV not recording when connected to VCR/DVD recorder via SCART?
- J
  Janice ChavezSep 5, 2025
  If your TV is connected to your VCR or DVD Recorder via SCART but it is not recording, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV, in addition to the SCART connection.
M
michele74Sep 8, 2025
What to do if Sharp TV does not recognize USB drive?
- A
  Ashley ColeSep 8, 2025
  If your Sharp TV doesn't recognize a USB Memory Key, make sure the USB Memory Key is formatted to type FAT32.
J
juancarrilloSep 10, 2025
How to use a large USB hard drive with my Sharp LC-60UI9362K?
- M
  Maria WolfeSep 12, 2025
  If you wish to use a portable hard drive larger than 32GB with your Sharp TV, it must be formatted to the FAT32 file system. Note that Windows XP/Vista computers can only format up to 32GB, so you'll need a software program/utility to format larger hard drives. Please refer to the website, www.umc-uk.co.uk, for more information.

Sharp LC-60UI9362K Specifications

General

Screen Size	60 inches
HDR Support	Yes
Smart TV	Yes
Operating System	Aquos Net+
HDMI Ports	3
USB Ports	3
Wi-Fi	Yes
Bluetooth	Yes
Display Technology	LED
Refresh Rate	60 Hz
Resolution	3840 x 2160