Non-Freeview Play 7 Day Guide
33
Seven Day Programme Guide
Note: When the TV set is on, a reminder message will be displayed informing you that a programme is
about to start. If the set is in standby, then it will turn on at the reminder time.
Note: When recording in standby mode, the set will not turn on. While recording in standby, the light
on the front of the set will flash.
Note: Record functions are only applicable to sets with a built in USB Record/PVR function.
To Record a Television Programme
To record a programme, select ‘Record’ and the display
will change as shown on the right. This allows for the
time and frequency of the recording to be set as desired.
Once adjustments to the time and frequency have been
set, save the instruction. This will now appear in the
schedule list as a recording to be made.
If a current programme is set for recording, the start
time will be set a minute in the future to allow settings
to be made and saved.
To Set a Reminder for a Television Programme
To set a reminder, select “Remind” and the display will
change as shown on the right. This allows for the time
and frequency of the reminder to be set as desired. Once
adjustments to the time and frequency have been set,
save the instruction. This will now appear in the schedule
list as reminder
Reminders cannot be set for programmes currently being
transmitted.
To view the list of scheduled reminders got to Quick
Settings and select Schedule List, the screen to the right
will be shown. This will indicate which reminders have
been set and when. Press the [MENU] button to edit.
Non-Freeview Play models will display the Programme Guide as shown below.
Initial Document.indd Sec1:33Initial Document.indd Sec1:33 26/11/2018 13:01:2626/11/2018 13:01:26
To Next Page
Loading...
Need help?
General