Note: Be sure that there are no obstructions between receiver and remote control;
Don't drop or throw the remote control; Don't spill any liquid on the remote
control; Don't leave remote control directly in sunlight or hot environments.
Pres s this button to turn Sleep mode on or
off. Sleep mode "off" is defau lt when
switch ed on. Sleep functi on is ca ncelled
when unit is sw itched off. Slee p mode
durati on can be ad justed . Sleep mode is
not av ail ab le under Fan and Auto modes .
Press this button to select between Auto,
Low, Middle and High speed fan settings.
Auto fan speed is default when unit
switched on.
AUTO
Press this button to set clock function.
the clock symbol will blink and display.
Within 5 seconds, the time can be adjusted
by pressing + or - button. Press button
continuously for rapid time change.
During blinking, press confirm button or
clock button again to complete time setting.
Press this button to select between:
setting desired temperature, display
indoor ambient temperature, display
outdoor ambient temperature.
Press this button to select between Auto,
Cool, Dry, Fan and Heat modes. Auto
mode is the default when switched on.
Press this button to turn unit on or off.
Sleep function will be cancelled if unit
is turned off.
To Next Page
Loading...
